Follow

Works from 2014

PDF

Multiple-orifice uniform-droplet spraying for the production of fine mono-sized solder balls, Mingze Chen

PDF

Experimental convective heat transfer in entrance portion of rib roughened channels, Gidley E. Dorlus

PDF

Experimental heat transfer coefficients and friction factors in a rib-roughened leading-edge cooling cavity of a gas turbine airfoil, Peter Jacob Hagan

PDF

Analysis of Dickerson dodecamer and several proteins using x-ray anomalous scattering, Shuo Huang

PDF

Investigation of the effects of particle temperature and spacing on multi-particle impacts in cold spray, Andrew Hulton

PDF

Design and control of a 2 degree of freedom upper limb robotic rehabilitation device, Patrick Joseph Murphy

PDF

Design, prototyping and bench testing for biomedical devices, Yu Pu

PDF

Experimental heat transfer in midchord and leading edge turbine blade cooling passages with staggered turbulators, Gerard Martin Quinn

PDF

Measurement of laminar burning speeds and investigation of flame stability of acetylene (C2H2)/air mixtures, Emad Rokni

PDF

Active vibration control of a flexible plate system, Charles Sidoti

PDF

An experimental study of heat transfer coefficients and friction factors in airfoil leading edge cooling cavities roughened with slanted ribs, Benjamin S. Tom

Works from 2013

PDF

Experimental heat transfer and discharge coefficients for multiple confined jets normal to the target surface at close distances, Mian Cao

PDF

Efficient product rationlization within a single product portfolio, Jackson Chou

PDF

Environmentally-benign conversion of biomass residues to electricity, Andrew Davies

PDF

Heterogeneous nanostructure flexible hybrid quasi solid-state supercapacitor based on vertical aligned carbon nanotubes and carbon nanocups, Fabrizio Martini

PDF

Particulate emissions from combustion of biomass in conventional combustion (air) and oxy-combustion conditions, Amanda Ruscio

PDF

Prolytic gasification of post-consumer polyolefins to generate clean-burning fuels, Rasam Soheilian

Works from 2012

PDF

Design strategies for a drinking cup to accommodate hand tremor, Ehsan Abbaszadeh

PDF

Production of tin and tin-based alloy spheres via multi-orifice uniform droplet spraying, John Crum

PDF

Metallic sandwich panels subjected to multiple intense shocks, Hamid Ebrahimi

PDF

Driver lane change intention recognition by using entropy-based fusion techniques and support vector machine learning strategy, Xianyi Huang

PDF

An experimental investigation of impingement heat transfer in a rib-roughened trailing-edge channel with crossover holes, Xiao Huang

PDF

Passive/active vibration control of flexible structures, Matthew Thomas Jamula

PDF

Densification and bonding of copper and aluminum powders, Yangfan Li

PDF

Bone fracture prediction using computed tomography based rigidity analysis and the finite element method, John Alexander Rennick

PDF

Experimental investigation of the discharge coefficient and impingement heat transfer characteristics of a single jet in cross flow, Brian Roberts

PDF

Coupled-notion vs. plucked energy harvesting: which performs better?, Ryan St. Pierre

PDF

Waste to energy conversion by stepwise liquefaction, gasification and "clean combustion" of pelletized waste polyethylene for electric power generation - in a miniature steam engine, Saber Talebi Anaraki

PDF

Finite element analysis and a model-free control of tension and speed for a flexible conveyor system, Zhan Zhang

Works from 2011

PDF

Computational fluid dynamics for the design of efficient cell seeding device, Adebayo Adeniran Adebiyi

PDF

Mechanical properties of hierarchical honeycomb structures, Ghanim Alqassim

PDF

Experimental impingement heat transfer of a rib-roughened trailing-edge channel with cross over jets and bleed holes, Sultan Al shehery

PDF

Producing and optimizing novel materials and structures, Mahdi Ashrafi

PDF

Computational studies of steering nanoparticles with magnetic gradients, Sultan Suleyman Aylak

PDF

Mechanics of three dmensional cellular structures, Sahab Babaee

PDF

Laminar burning speed and flame structure of 1,1-difluoroethane (HFC-152a)/air and difluoromethane (HFC-32)/air mixtures, Casey Paul Bennett

PDF

Magnetic and magnetotransport characteristics of nanostructures and nanostructured semiconductor systems, Steven Bennett

PDF

Adhesively bonded joints with non-flat interfaces, Shih-Hung Chiu

PDF

The two-dimensional in-plane cylindrical impact of regular hexagonal honeycomb structures: a finite element study, Jonathan M. Erickson Hammel

PDF

A study of quantitative concentrations of hydroxyl (OH) in laminar flat flames using planar laser induced fluorescence (PLIF), Adrienne Murphy Jalbert

PDF

Buckling of a cracked cylindrical shell reinforced with an elastic liner, Yoontae Kim

PDF

Low cost, compact braille printing head for use in a handheld braille transcribing device, Matthew David Ouellette

PDF

Effects of alumina slurry jet on polishing and erosion of aluminum substrate: experimentation and cfd modeling, Shreyansh P. Patel

PDF

Continuous polyethlyene pyrolysis for hybrid flame/CVD synthesis of carbon nanotubes, Nicholas Wilder Richardson

PDF

Method and evaluation for minimization of mechanical effects from impact velocity for the optimization of freezing quality of metal mirror impact freezers, Nector Ritzakis

PDF

Experimental Convection heat transfer and flow discharge coefficients for multiple confined jet impingement normal to a surface at close distances, Nathaniel Risler Rosso

PDF

The extraction of tropocollagen and proteoglycans from bovine eyes and investigation of their recombination using a new method to quantify fibrillogenesis, Blake Anthony Sama

PDF

Analysis and verification of fatigue reliability variation under two-stage loading conditions, Bharadwaj Sathiamoorthy

PDF

Theoretical and experimental investigation of a two-agent consensus dynamics with communication delays, Andranik Valedi

PDF

Efficiency investigation of a helical turbine for harvesting wind energy, Nathan Willard

Works from 2010

PDF

An experimental investigation of impingement cooling in an airfoil leading-edge cavity, Amr Abdel-Rasoul

PDF

Design and test of Northeastern University Virtual Ankle and Balance Trainer (NUVABAT), Ye Ding

PDF

Experimental study of impingement heat transfer at small jet to target surface distances, Awaru Deepti Dutt

PDF

Numerical investigation of impingement cooling in an airfoil leading-edge cooling channel, Kariem Elebiary

PDF

An experimental investigation of impingement heat transfer in a rib-roughened trailing-edge channel with crossover holes, Michael Ka Hing Fong

PDF

An SPM based tester for the study of microcontacts, Nikhil Joshi

PDF

Dielectric electroactive polymer based biomedical devices: control, sensing and interfacing, Muzaffer Yalgin Ozsecen

PDF

Ultrasonic materials processing - with applications to powder consolidation of Cu-Cr composites and surface hardening of aluminum, Faryar Tavakoli-Dastjerdi

Works from 2009

PDF

Effect of restitution coefficient on inertial particle separator's efficiency, Mehdi Abedi

PDF

Finite element analysis and preliminary experiments to study the effects of high myopia in macular degeneration, Aneesh Ajay Bendre

PDF

Mechanism of load transfer along the bone-dental implant interface, Samira Faegh

PDF

Nonmagnetic particle separation using ferrofluids controlled by magnetic fields, James Andrew Forte

PDF

Quantitative hydroxyl (OH) concentration calibration by use of a flat flame burner, thermocouple and planar laser induced fluorescence (PLIF) system, Colin Francis Fredette

PDF

Design and control of active knee rehabilitation orthotic device (AKROD), Vishal Jain

PDF

Mechanical and viscoelastic characterization of polyvinyl alcohol (PVA) hydrogel membranes using the shaft-loaded blister test, Edgar José Montiel-Rubio

PDF

Experimental impingement heat transfer in a smooth channel with cross over jets and bleed holes, Amornrat Nongsaeng

PDF

Implementation of sensors and control in biomedical rehabilitative devices, Maciej Dariusz Pietrusinski

PDF

Design & Implementation of Biomedical Devices for Evaluation & Rehabilitation Highlighting Rapid Prototyping Tools & Processes, Richard Gabriel Ranky

PDF

Design of virtual environments for rehabilitation devices, Mark Langdon Sivak

PDF

Calcification of polyurethane heart valve prosthesis, Parnian Boloori Zadeh

PDF

Synthesis of carbon nanotubes from waste polyethylene plastics, Chuanwei Zhuo

Works from 2008

PDF

Mechanical behavior of cellular structures: a finite element study, Amin Ajdari

PDF

Measurement of hydroxyl (OH) concentration of transient premixed methane-air flames by Planar Laser Induced Fluorescence (PLIF) method, Raymond James Andrews

PDF

Effects of blending, staging and furnace temperature on co-firing of coal and biomass-bagasse, Joshi Kulbhushan Arvind

PDF

Strain stabilizes reconstituted collagen fibrillar network against enzymatic cleavage by collagenase, Amit Bhole

PDF

Fluidic assembly of highly organized single-wall carbon nanotubes in nano and micro scales - characterization and investigation of the assembly mechanism, Laila Jaber-Ansari

PDF

Frictional characteristics of thin polytetrafluoroethylene films deposited on glass by hot filament chemical vapor deposition method, Michael A. Karnath

PDF

Different approaches of remodeling of bone to predict bone density distribution of proximal femur, Ali Marzban

PDF

Modifying road and vehicle databases at hills and curves, Govindaraaj Mudumbai

PDF

Design of a compression bioreactor for the mechanical stimulation of native and artificial cartilage and the study of the kinetics of enzymatic degradation of collagen fibrils in loaded cartilage, Anirudha Mundra

PDF

Continuum modeling and analysis of the frictional interaction between a CNT and substrate during dragging, Palaniappan Nagappan

PDF

Theoretical and experimental analysis of a biomimetic printer of anisotropic arrays of type I collagen fibrils or "nanoloom", Kathryn Nicole Portale

PDF

Experimental and theoretical investigation of soot onset threshold, chemical speciation and flame properties of ethylbenzene-ethanol blends, Richard Joseph Therrien

PDF

Adhesion in spherical contacts and in electrostatic actuation of a carbon nanotube, Yu-Chiao Wu

PDF

Influence of mechanical load on enzymatic cleavage of corneal collagen, Ramin Zareian