Kaushik R. Chowdhury, Scott Bailie
Date of Award
Master of Science
Department or Academic Unit
College of Engineering, Department of Electrical and Computer Engineering
electrical engineering, cognitive radio, FPGA, software defined radio, spectrum sensing
Electrical and Computer Engineering | Engineering
The FPGA is an integral component of a software defined radio (SDR) that provides the needed reconfigurability for dynamically adapting its transceiver and data processing functions. Because of the desire to process data faster and with less latency, researchers are looking at FPGA-based SDR. Our architecture, called CRUSH (Cognitive Radio Universal Software Hardware), is composed of a Xilinx ML605 connected to an Ettus USRP through a custom interface board, allowing flexible data transfer between them. In addition, we provide a framework that supports ease of use, independent programming on both devices, and integration with software running on the host. To demonstrate our platform we implemented spectrum sensing, a key step in determining channel availability before transmission in dynamic spectrum access networks. Spectrum sensing is implemented on CRUSH using FFTs for a 100x speedup; the complete sensing cycles is 10x faster than the same design without CRUSH. By reducing the load on the host and allowing a powerful FPGA extension for off-the-shelf devices, CRUSH enables advances in both protocol design and reconfigurable hardware targeting radio applications.
George Fredric Eichinger III
Eichinger III, George Fredric, "CRUSH: Cognitive Radio Universal Software Hardware" (2012). Electrical and Computer Engineering Master's Theses. Paper 78. http://hdl.handle.net/2047/d20002486
Click button above to open, or right-click to save.